A comprehensive overview of your Fire Door

Your door has been fitted with specific hardware including the handle, lock, door closer, letter plate and door viewer.

In order to keep the fire rating intact, DO NOT adjust or remove these items, to do so would invalidate the fire rating.

The glass used in your door is fire rated and assembled according to the certification requirements.

Replacement of glass should ONLY be carried out by the door manufacturer or accredited persons on a like for like basis.

Cleaning the Hardware

For continued protection of the quality finish
and appearance of the composite fire door external hardware (locks, hinges, letter plate etc.) routine cleaning and lubrication is advised.

Door Lock and Hinges:
A light application of PTFE spray to be used into the apertures of the hooks, dead-bolt, latch, hinges and into both sides of the cylinder at least twice a year

Letter plates, handle, door knocker:
Wash the surface with warm soapy water (washing up detergent is suitable) and wipe dry with a soft, clean cloth

Protecting your hardware
To prevent any damaging effect to the corrosion protection of door hardware, only PER neutral cleaning and care agents which do not contain any abrasives should be used.

High-corrosion environments
If the products are used within 5 miles of the coast line or close proximity of large industrial areas, more frequent cleaning and maintenance is required to prevent accumulation of corrosive contaminants.